Tires; How To Measure Tire Pressure - Yamaha YFM100T 1987 Manuel Du Propriétaire

Tires from the rim under severe riding condi-
tions.
The following are minimums:
This model is equipped with low pressure tires. Front 17.0 kPa (0.17 kg/cm 2 , 2.4 psi)
It is important that they be inflated cot- Rear 17.0 kPa (0.17 kg/cm:,2.4 psi)
rectly and maintained at the proper pressures. 2, Use no more than
e Tire characteristics influence the handling Front 210 kPa (2.1 kg/cm:, 30 psi)
of ATV's. The tires listed below have been Rear 210 kPa (2.1 kg/cm 2 , 30 psi)
approved by Yamaha Motor Co., Ltd. for
when seating the tire beads. Higher
this model. If other tire combinations are
pressures may cause the tire to burst.
used, they can adversely affect your inflate the tires very slowly and care-
machine's handling characteristics and are
fully. Fast inflation could cause the tire
therefore not recommended, to burst.
Manufacturer Size Type
Front BRIDGESTONE AT18 x 7-7 MH03
HOW tO measure tire pressure
CHENG SHIN AT18 x 7-7 C864
Use the low-pressure tire gauge.
Rear BRIDGESTONE AT20 x 9-8 MH04
NOTE:
CHENG SHIN AT20
x
9-8 C865 The low-pressure tire gauge is included in the
standard equipment.
e Recommended tire pressure
Front 20.0 kPa (0.20 I¢g/cm 2, 2.8 psi) If dust or the like is stuck to this gauge, it
does not provide correct readings. Therefore,
Rear 20.0 kPa (0.20 kg/cm 2 , 2.8 psi)
make two measurements on the tire pressure
1. Tire pressure below the minimum speci- and get the second reading.
fled could cause the tire to dislodge 5-4