Scope Of Delivery; Installation; Prescribed Installation Method - Dometic SPX1200I Instructions De Montage

CoolAir SPX1200I
5

Scope of delivery

Item in
fig. 1
–
–
6

Installation

A
NOTICE!
• The parking cooler may only be installed by qualified personnel from a
specialist company. The following information is intended for specialists
who are familiar with the guidelines and safety precautions to be applied.
• The evaporator unit must be installed in an upright position (fig. 2).
6.1

Prescribed installation method

The parking cooler consists of the following components (fig. 3):
• CoolAir SPX1200C condenser unit (2)
• CoolAir SPX1200I rear panel evaporator unit (1) with connecting line (3)
The condenser unit (2) is attached to the firm and straight rear panel of the cab or
by means of a firm fastening frame. The evaporator unit (1) is fitted on the inside
of the rear panel of the cab.
EN
Part designation
Evaporator unit with connecting cable
Insulating plate
Edge protection Ø 13 mm
Edge protection Ø 36 mm
Clip
Screw M6 x 10 mm
Cover for clip
Hood for rear panel
Self-tapping screw 3.5 x 9.5 mm
Plastic spacer L = 25 mm
Hexagon screw M6 x 40
Plastic spacer L = 40 mm
Hexagon screw M6 x 110
Washer M6 (d1 = 6.4 mm, d2 = 20 mm)
Remote control (incl. type CR2025 battery)
Evaporator unit installation template
Scope of delivery
Quantity
1
1
1
1
4
4
4
1
4
4
4
8
4
8
1
1
7