Protecting The Device Against Damage - Telestar S20i Manuel D'utilisation

2. SAFETY INSTRUCTIONS
installed grid socket with 220-240 V
alternating current, 50-60 hz.
> Place the radio on a solid, even surface.
> The device consumes power in standby mode.
E
To fully switch off the device, the power
plug must be pulled from the socket or the power unit on the
back of the device must be switched off.

2.5. Protecting the device against damage

> Unfavourable surrounding conditions, such as moisture,
excessive heat or a lack of ventilation may
damage the device.
> Only use the device in dry rooms.
Avoid direct proximity to heat sources, such as
radiations, open fires (e.g. from candles),
devices with a strong magnetic field, such as
loudspeakers.
Do not expose the device to extreme conditions,
such as direct sunlight, severe
humidity, moisture, extremely high or low
temperatures, open flames.
> Ensure sufficient distance to other objects
to prevent the device from being obstructed, so that
sufficient air ventilation is guaranteed.
> Avoid direct sunlight and places
with an exceptional amount of dust.
Operating Manual 94