Installation; General Operating Instructions; Preparing The Remote Control - Telestar S20i Manuel D'utilisation

6. INSTALLATION

6.1 General operating instructions

> Switch the device on or off using the standby
button on the remote control.
> You can increase the volume using the VOL+ button
on the remote control.
> You can decrease the volume using the VOL+ button
on the remote control.
> The menu items can be selected the ▼▲ control.
Using the ENTER button, you can confirm a
>
selection.

6.2. Preparing the remote control

Remove the battery transport lock on the remote control. To do
so, slide the plastic slip out of the battery compartment of the
remote control. This establishes the battery contact.
To replace the remote control battery, open the battery compart-
ment on the back of the remote control.
Pull the battery compartment out of the remote control.
Remove the battery and insert a new battery of the same type.
There is a risk of explosion if not used properly!
Please read the related safety information in Chapter 2.8.
109
E
TELESTAR S20i