Connecting The Device; Protecting The Device Against Damage - Telestar M 10 Manuel D'utilisation

2. SAFETY INFORMATION

2.4. Connecting the device

> Only plug the device into properly
installed, earthed and electrically secured power
sockets.
> Please keep the power source (socket) easily
accessible.
> Do not bend or squeeze any cables.
> Before using the device, check whether the voltage
specification on the device corresponds to your local
power voltage. The specifications on the power unit
must correspond to the local power grid.
> Only plug the device into a properly
installed grid socket with 220-240 V
alternating current, 50-60 hz.
> Place the radio on a solid, even surface.
> The device consumes power in standby mode.
To fully switch off the device, the power
plug must be pulled from the socket or the power unit on the
back of the device must be switched off.

2.5. Protecting the device against damage

> Unfavourable surrounding conditions, such as moisture,
excessive heat or a lack of ventilation may
damage the device.
> Only use the device in dry rooms.
67 TELESTAR M10 / S20
E