Wireless Network (Wps Pbc); Wifi Status - Telestar S20i Manuel D'utilisation

7. SETTINGS

7.1.2. WIRELESS network (WPS PBC)

WPS is a function on WIFI devices that allows you to establish
a network connection at the touch of a button without having to
E
enter a network password.
This makes it easier to create a connection.
This radio-supported push button configuration can be used if the
network router to which a connection is to be established has a
WPS button. (Some routers offers this directly as a software
solution in the operating system).
To establish a network connection this way,
please proceed as follows.
Use the ▼▲ buttons on the remote control to select WIRELESS
network (WPS PBC) in the Network assistant area and press
the OK button on the remote or confirm by using ENTER button
on the device.
Now press the WPS button on your network router
within 120 seconds, or activate the WPS function in the router's
user interface.
The network connection is now established automatically.

7.1.3. WIFI status

Use this menu to check the details of the connected network. The
information contains among other things the MAC address or the
IP address.
Operating Manual 116