Maintenance; Cleaning The Cmm (Iq) Easy; Changing The Electrode Head - Simco-Ion Charge Master Micro IQ Easy Notice D'utilisation

Figure 16, DataLog tab.

8 Maintenance

Warning:
- Disconnect the power supply before carrying out work on the unit.

8.1 Cleaning the CMM (IQ) Easy

- Clean the CMM (IQ) Easy with a soft cloth.
- If very dirty: Clean the CMM (IQ) Easy with isopropyl alcohol or with Veconova 10 industrial
cleaner (www.eco-nova.nl).
Note:
- Allow the CMM (IQ) Easy to dry completely before operating it again.

8.2 Changing the electrode head

The electrode head on the CMM Easy is part of the charging electrode. When changing a
charging electrode, the electrode head must also be changed.
See also figure 3.
- Turn the locking screw for the electrode head right into the housing of the
CMM (IQ) Easy.
- Pull the electrode head off the CMM (IQ) Easy.
Slide the electrode head of the second charging electrode onto the CMM (IQ)
Easy.
- Manually turn the locking screw upwards until it is securely fastened in the
electrode head.
CMMEasyCMMIQEasy_UM_9752098500_NL_D_GB_F_V3_1
Figure 17, Maintenance tab.
GB
61