Iml Charging Cycle Without Use Of Cycle Ok Feedback; Iq Functions (Only Cmm Iq Easy) - Simco-Ion Charge Master Micro IQ Easy Notice D'utilisation

Note:
The following parameters can be set through the Simco-Ion IQ platform only when using
the CMM IQ Easy with IQ function:
- Cycle OK delay, between the moment the CMM IQ Easy detects that the label(s) have been
charged and activation of the "Cycle OK"-signal, an additional delay can be set in order to
increase process stability.
- Cycle OK low detection, the level where the CMM IQ Easy detects that the charge of the
electrode has decreased sufficiently can be adjusted for additional process optimisation.

6.4 IML charging cycle without use of Cycle OK feedback

The control unit can ignore the Cycle OK feedback signal and follow the procedure described in
6.3. The Remote On/Off signal will need to remain active for a longer pre-determined period in
order to ensure that the label has enough time to charge. After the generator has been switched
off, you will need to wait a specific set time before the electrode can be removed from the
mould. This will result in longer cycle times.

6.5 IQ functions (only CMM IQ Easy)

The IQ functions described in this chapter are only available on the CMM IQ Easy in conjunction
with a Manager IQ Easy. As soon as the CMM IQ Easy is connected to the Manager IQ Easy,
the generator will appear in the manager's (main) screen (Figures 7 and 8). The colour in the
manager's main screen indicates the status of the CMM IQ Easy:
Inactive or no communication
Active (Run) and operating OK, without warnings or alarms
Standby, waiting for start command
Warning
Alarm
The status of the CMM IQ Easy is also indicated by the following symbols:
Hourglass
Pause
Play
The number of visible parameters depends on the user level selected on the Manager IQ Easy.
This manual uses the "Expert" user level. The user level can be selected as follows: go to the
manager's main screen, first select
selected.
CMMEasyCMMIQEasy_UM_9752098500_NL_D_GB_F_V3_1
= CMM IQ Easy is starting up
= CMM IQ Easy is on Standby
= CMM IQ Easy is active (Run)
and then . The "Expert" user level can now be
GB
55