Functional Check Through The Leds; Functional Check Through The Manager Iq Easy - Simco-Ion Charge Master Micro IQ Easy Notice D'utilisation

7 Functional check

7.1 Functional check through the LEDs

The system is functioning properly when the LEDs on the CMM (IQ) Easy flash green (standby)
or light up orange (HV active). Any other LED indication signifies a process error or fault. During
normal operation, the Cycle OK output will become active after the LEDs have turned orange.
Table 1, LED indications CMM (IQ) Easy
LED indications
Green flashing quickly
Green flashing slowly
Orange
Red
Red flashing slowly, 1Hz
Red flashing quickly, 5Hz
See chapter 9 (Faults) to resolve problems.

7.2 Functional check through the Manager IQ Easy

The Manager IQ Easy's display provides information about the status of the CMM IQ Easy. Both
on the main screen and on the device screens, the status of the CMM IQ Easy is always
indicated by the background colour (see chapter 6.5 for more information about colours and
symbols).
Detailed information is provided in the tabs Information/Settings, Graphics, ActionLog and
DataLog.
Figure 14, Graphics tab
CMMEasyCMMIQEasy_UM_9752098500_NL_D_GB_F_V3_1
Meaning
Start up
Standby, HV output not active
Normal operation, high voltage active
High voltage overloaded, HV output active
1) Generator overheated, HV output temporarily inactive
OR
2) Supply voltage too low, HV output unchanged
3) Cycle OK output overloaded, HV output active
4) Output current peak too high or too low, HV output
unchanged (only CMM IQ Easy)
5) Charge pulse too long, HV output unchanged (only
CMM IQ Easy)
6) Eeprom reading error, HV output unchanged
No communication with the Simco-Ion IQ platform, HV
output inactive (only CMM IQ Easy)
Figure 15, ActionLog tab
GB
59