Installation; Checks; Fitting The Cmm (Iq) Easy - Simco-Ion Charge Master Micro IQ Easy Notice D'utilisation

Mechanical
Dimensions (lxwxh)
Weight
Housing material
5-pin M12 connector
Earth connection
Figure 2, dimensions of the CMM (IQ) Easy

5 Installation

Warning:
- The electrical installation must be carried out by an electrical engineer with the
relevant training and qualifications.
- Disconnect the power supply before carrying out work on the unit.
- The CMM (IQ) Easy must be properly earthed. Earthing is needed to ensure proper
operation of the equipment and to avoid electrical shocks upon contact.

5.1 Checks

- Check that the equipment is undamaged and that you have received the correct version.
- Check that the data on the packing slip corresponds to the data shown on the product
received.
- Check that you have received a connection cable with a 5-pin M12 connector (female).
A standard connection cable can be obtained from Simco-Ion Netherlands or from the agent
in your region.
See the spare parts list.
If the connection cable is to be fitted through a cable carrier, please use the special flexible
connection cable available from Simco-Ion or another type that is suitable for this purpose.
If you have any problems or are unsure, please contact Simco-Ion Netherlands or the agent in
your region.

5.2 Fitting the CMM (IQ) Easy

The CMM Easy must be fitted so that the connection cables of the charging electrode are within
reach of the electrode head; preferably so that the electrode head can be removed without
dismantling the entire generator.
CMMEasyCMMIQEasy_UM_9752098500_NL_D_GB_F_V3_1
200 x 45 x 43 mm (including electrode head)
0.48 kg (excluding high-voltage cables)
Aluminium, ABS, PVC (electrode head)
Electrode head with 1–8 connection cables
GB
51