Safety - Simco-Ion Charge Master Micro IQ Easy Notice D'utilisation

If the CMM IQ Easy with IQ function is connected to the Simco-Ion IQ platform, the "Setpoint"
and "Remote On/Off" will be configured on or through the Simco-Ion IQ platform.
Communication between the CMM IQ Easy and the Simco-Ion IQ platform runs through a serial
protocol. Sending the "Cycle OK" signal back to the Simco-Ion IQ platform is also done through
this serial protocol. In addition, the CMM IQ Easy offers a number of adjustable parameters
which can only be used if the generator is connected to the Simco-Ion IQ platform. Please see
the manual of the IQ Easy Manager or the IQ Com communication adapter for more
information.
Two LEDs on the generator (on the same side as the M12 connector) indicate the status of the
CMM (IQ) Easy.

3 Safety

The following safety guidelines must be observed in order to prevent physical injury and
damage to objects or to the CMM (IQ) Easy itself.
The output current of the CMM (IQ) Easy is limited to 0.4 mA.
If the combined capacity of the connected electrodes is lower than 2 nF, then the output of the
generator is safe to touch.
Danger:
Make sure that the equipment is properly earthed. Earthing is necessary to ensure safe and
proper operation and to prevent electric shocks upon contact.
- Touching parts being subjected to a high voltage will result in an electric shock.
- Exposure to high voltages can be dangerous for people with pacemakers.
- An electric shock can cause a shock reaction, even from high voltages that are safe to touch!
Warning:
- Electrical installation and repairs must be carried out by a skilled electrical engineer with the
relevant training and qualifications.
- Disconnect the power supply before carrying out work on the unit.
- The CMM (IQ) Easy must not be used in environments that pose a fire or explosion hazard.
- The CMM (IQ) Easy is designed solely for charging non-conductive materials in combination
with a charging electrode with a special CMM (IQ) Easy head that fits on the generator. It is
not advisable to use it for any other purpose.
Note:
- Making changes, adjustments etc. without prior written consent or carrying out repairs using
non-original parts will invalidate the equipment's guarantee.
CMMEasyCMMIQEasy_UM_9752098500_NL_D_GB_F_V3_1
GB
49