Installation And Setting; Mounting Tools - Meister WS750-125M Traduction Du Manuel D'utilisation Original

Housing is double insulated
CE Mark (conformity to Euro-
pean safety standards)
Joining thread M14
Disk size 125 mm
Ø 125 mm
BJ Year of construction
SN: Serial number
SN: XXXXX T he first two underlined
numbers give the month of
manufacture.
7 – Installation and setting
Disk guard
The position of the disc cover (3) can
be adapted to suit the relevant working
conditions. To do this, loosen the
screw (11) with a screwdriver and turn
the cover to the new position. Tighten
the screw back up again (fig. 3).
The open disc cover included in the
scope of delivery for this item is designed
solely for use with grinding discs.
CAUTION! The closed part of the
disk guard should always point
towards the user to protect him from
sparks and chippings.
Separating work must be carried out
with a protective mechanism designed
specifically for the purpose.
5405130-Winkelschleifer-man.indd 61 5405130-Winkelschleifer-man.indd 61
Mounting and removing the disc cover
Change the disc cover according to
requirement and usage. To do this, loos-
en the screw (11) until the cover can be
removed by rotating it out of the guide
groove of the grinding head.
To mount the disc cover, follow instruc-
tions in reverse order.

Mounting tools

CAUTION! Before working on the
machine, always pull out the
power plug!
Separating discs, grinding and rough­
ing discs
All types of separating and roughing
discs can be mounted to the spindle (4)
(Figure 2) (offset A/B and flat). Depend-
ing on the type of disc and the thick-
ness, a suitable arrangement of the ten-
sioning disc (9) and the clamping nut (8)
is selected
Press the spindle-locking button
(5) in deep and hold it in this
position. If necessary, turn the
spindle slightly with the free hand until it
locks into position. Tighten the clamping
nut with the flange key provided (fig. 5).
Do not work with disks thicker than
6 mm.
CAUTION! Allow disks to cool
down before changing them.
HOT! Always work with the disk guard
in position!
CAUTION! With accessories, always
comply with the manufacturer's
directions. The maximum rotation
speed must be greater than the idling
speed of the machine.
61
27.10.20 12:18 27.10.20 12:18