Service Instructions - Meister WS750-125M Traduction Du Manuel D'utilisation Original

CAUTION! Conductive metallic
dust may impair the function of
the machine.
When working frequently with metals,
blow the ventilation slots out regularly
with compressed air and if necessary
install a safety cut-out switch (FI).
Replacing the carbon brushes
Always have the carbon brushes replaced
in pairs by a specialist. At the same time,
have dust removed from the contacts
using a brush or compressed air.
CAUTION! Electrical and battery
operated units that no longer
work should not be disposed of in the
household waste! They are to be col­
lected separately, in accordance with
the 2012/19/EU directive for
the disposal of electrical and
electronic waste, and sent
for proper and environ ­
mentally­friendly recycling.
Please discard power tools no longer
usable at a local collection point. Col­
lection and disposal of packaging mate­
rials separately by types complying with
local rules and regulations. For details,
please contact your municipal authority
concerned.
11 – Service instructions
• Store the machine, operating instruc-
tions and where necessary the acces-
sories in the original packaging. In this
way you will always have all the infor-
mation and parts ready to hand.
• Meister devices are to a large extent
maintenancefree, a damp cloth being
sufficient to clean the casing. Do not
drop electrical machines in water.
5405130-Winkelschleifer-man.indd 63 5405130-Winkelschleifer-man.indd 63
Please note additional hints given in
the operating instructions.
• Meister devices are subject to stringent
quality control. If however a functional
fault shoult occur, send the device to
our servicing address. The repairs will
be carried out in a short time.
• A brief description of the defect
speeds up the faulttracing and repair
time. If within the guarantee period,
please enclose the guarantee docu-
ment and the proof of purchase.
• In so far as a repair under guarantee
is not concerned, we will charge the
repair costs to your account.
PLEASE NOTE! Opening of the
device invalidates the guarantee
claim.
IMPORTANT! We point out express­
ly that in accordance with the Prod­
uct Liability Act we do not take responsi­
bility for any damage caused by our
appliances, in so much that said damage
is caused by improper repair, or original
parts or parts released by us not being
used when parts are changed, or
repairs not being conducted by
Conmetall Meister GmbH, Customer Ser­
vice or an authorised specialist! The
same applies analogously to the acces­
sories used.
• Pack the device well or use the origi-
nal packaging in order to avoid transit
damage.
• Even after the expiry of the guarantee
period, we would like to help you and
carry out any repairs at a favourable
price.
63
27.10.20 12:18 27.10.20 12:18