Meister WS750-125M Traduction Du Manuel D'utilisation Original page 60

• Always store and handle grinding
disks carefully in accordance with the
manufacturer's directions.
• Check disks before using them. Never
use chipped, cracked or otherwise
damaged products.
• Ensure that grinding tools are mount-
ed according to the manufacturer's
directions.
• Always use spacers or shims if these
are supplied with the grinding tool or
if they are specified.
• Ensure that the grinding tool is cor-
rectly mounted and secured before
starting work. Allow the machine to
run for 30 sec. in a safe position
beforehand. Stop work immediately if
unusual vibrations occur or other defi-
ciencies are noticed. In such a case,
check the machine carefully to deter-
mine the cause.
• Never use separate reducing sleeves
or adapters to fit grinding disks with
large holes.
• With grinding tools with thread insert,
ensure that the thread is long enough
to take the full length of the spindle.
• Ensure that flying sparks do not cause
danger, e.g. to other persons or by
igniting inflammable substances.
• During dusty work, ensure that the
ventilation slits are kept free. If dust
has to be removed, first disconnect
the power tool from the power supply.
Use non-metallic objects and avoid
damaging interior parts of the
machine.
• The disk continues to run after the
60
machine is switched off. Do not lay
5405130-Winkelschleifer-man.indd 60 5405130-Winkelschleifer-man.indd 60
the machine aside until the disk has
come to rest.
• Always protect eyes and ears.
• Other personal safety equipment, e.g.
dust mask, gloves, helmet and clothing
(e.g. apron) should also be worn.
This unit may not be used by people
(including children) with reduced physical,
sensory or mental capacities, with a lack
of experience and without the appropriate
knowledge, unless they are supervised by
someone who is responsible for their
safety or have been instructed by such a
person with regard to how the unit is to
be operated. Children should be super-
vised to ensure that they do not play with
the device.
Safety symbols
The symbols on the housing have the
following meanings:
Do not dispose of with domes-
tic waste!
Important! Observe operating
instructions!
Wear goggles.
Use ear defenders
Wear a dust protection
mask.
„Tested Safety" voluntary
quality mark
27.10.20 12:18 27.10.20 12:18