Instructions; General Safety Instructions For Handling Power Tools - Meister WS750-125M Traduction Du Manuel D'utilisation Original

The user of the device must ensure suf-
ficient protective equipment during use
in accordance with the operating
instructions and the warning pictograms
applied to the tool. Prior to each use
and during the use of the tool, the tool
and the disc should be checked for any
electrical or mechanical damages.
If damage to the unit is determined, stop
work and contact a specialist workshop.
The machine is intended only for hand-
held (not fixed) use in the household.
The machine is not suitable for cutting
wet materials.
CAUTION! Incorrect use of, or
alterations to the drill, as well as
the use of parts not tested and
approved by the manufacturer, may
cause unforeseen damage.
Improper use
All applications carried out with the
device that are not listed in the „Proper
use" chapter will be considered improp-
er use.
The unit may not be used for the follow-
ing purposes:
• Processing of materials other than
those listed in the Proper use section,
• Use with a saw blade,
• Use as a stationary unit,
• As a drive for other units.
There is a risk of injury.
The user of the device is liable for all
property and personal damages occur-
ring as the result of incorrect use.
If other components or non-original
components are used with the machine,
the manufacturer guarantee is voided.
5405130-Winkelschleifer-man.indd 53 5405130-Winkelschleifer-man.indd 53
Remaining risks
Even when the device is used properly,
there is a residual risk that cannot be
excluded. The following potential dan-
gers are inherent in the type and con-
struction of the device:
• Contact with the unprotected grinding
disc,
• Grasping a still rotating grinding disc,
• Parts flying off of the grinding disc
and other parts,
• Damage to the hearing if the prescribed
ear defenders are not worn,
• Breathing in dust,
• Electrical shock when touching
non-insulated electrical components.
If the instructions in your operating
instructions are not observed, incorrect
use may result in other residual risks.
5 – General safety instructions
for handling power tools
I. General safety information
WARNING! Read all safety warn­
ings and all instructions. Failure
to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains operated (corded)
power tool or battery-operated (cord-
less) power tool.
1 Work area
a Keep work area clean and well lit.
Cluttered and dark areas invite acci-
dents.
53
27.10.20 12:18 27.10.20 12:18