Sensors; Switching Statuses (Outputs); Operating Hours - Maico RLS T2 WS Notice De Montage Et Mode D'emploi

10.4 Sensors

Parameter
Rel. humidity value
internal
Value of sensor 1
Value of sensor 2
Value of sensor 3
Value of sensor 4
Sensor for relative hu-
midity r. h. external
(KNX or Modbus)
Sensor for air quality
AQ, external (KNX or
Modbus)
Display
Relative humidity of ex-
haust air collected in
unit measured with
combi sensor. A correc-
tion value set under
Combi sensor humid-
ity adjustment is taken
into account.
Saved sensor type, its
room assignment or the
current measurement or
selected function and
its status.
Saved sensor type, its
room assignment or the
current measurement or
selected function and
its status.
Saved sensor type, its
room assignment or the
current measurement or
selected function and
its status.
Saved sensor type, its
room assignment or the
current measurement or
selected function and
its status.
Saved sensor type, its
room assignment and
the current measured
value. These sensors
are also taken into ac-
count in Auto Sensor
mode.
Saved sensor type, its
room assignment and
the current measured
value. These sensors
are also taken into ac-
count in Auto Sensor
mode.
10 Main menu value call-up

10.5 Switching statuses (outputs)

Parameter
Supply air fan
Exhaust air fan
Bypass shutter
Heat register
Switching contact Basic
circuit board (main cir-
cuit board)
Brine circulating pump
(ZP 1)
Zone shutter (ZP1)
3-way air shutter
Supplementary heating
relay (ZP1)

10.6 Operating hours

Current runtime/operating hours of ventilation
levels and selected components.
Display
Supply air fan on or off
Exhaust air fan on or off
Bypass position open or
closed
Heat register on or off
Switching contact relay
active or inactive
Brine circulating pump
on or off
Zone shutter open or
closed
3-way air shutter, EHE
open or closed
Supplementary heat re-
gister active or inactive
51