Replacing Touchscreen Operating Unit - Maico RLS T2 WS Notice De Montage Et Mode D'emploi

6 Installation of RLS T2 WS
15.Slide the electronic slide-in module into the
electronic compartment and screw down if ne-
cessary (depending on unit type).
16.Attach front cover(s) → ventilation unit's in-
stallation instructions.
17.Switch on the mains fuse, switch on the ventil-
ation unit with the main switch.
18.Use the commissioning software to set the
parameter Basic settings / Comfort control
unit to RLS T2 WS.
19.Test settings and functions with the touch-
screen operating unit.
34
6.2 Replacing touchscreen operating
unit
Dismantling (steps ① to ④)
Installation (steps ① to ③)