Güde HWW 3100 K Traduction Du Mode D'emploi D'origine page 16

Structural group 7
Fig. 18
Structural group 8
Fig. 19
Structural group 9
Fig. 20
Structural group 10
Fig. 21
Safety Instructions for the First Putting in Operation
Caution: Never let the pump dry-run.

The user shall be held liable before third parties for operating the pump (basins, reservoirs etc.).

The pump should be used on connections with a stray current protection switch (FI switch)!

Before putting in use, a competent electrician should check that extension cables are available.

Connection to the mains via plugging.

Check the voltage. Technical data on the plate should conform with the mains voltage.

If the pump is used in ponds, fountains etc. or in reservoirs or basins, all the standards in effect in the countries of use should be
observed. .

Electric pumps for the outdoor use (e.g. ponds) shall be equipped with rubber-coated electric cable type H07RNF + H05RNF,
according to standards DIN 57282 or DIN 57245.

No people or animals should be/ be diving in the water to be pumped (pools, cellars etc.).
Required structural groups
Structural group 6
Required structural groups
Structural group 7
Required structural groups
Structural group 8
Required structural groups
Structural group 9
16
Delivery contained parts and
accessories
Delivery contained parts and
accessories
Fig. 11 – pos. 1
Fix the household water plant in
proper holes in the pump feet to
provide for its safe position.
Fill the pump via the filling neck until
clean water is running out. .