Telephoning; Restoring The Default Settings - switel DET087 Série Mode D'emploi

Telephoning

Programming the basic settings
Programming the basic settings relates to adapting the various handset settings to your own per-
sonal needs. Press the ‚ button to cancel a programming process. If you do not press a but-
ton within a 15 sec period, the process is automatically cancelled and any changes made are dis-
carded. Proceed as follows:
1. Start programming
3 sec ”, ”,
2. Volume and ringing melody for external calls
y / z, OFF to 5 , 1 to 5
3. Volume and ringing melody for internal calls
y / z , OFF to 5 , 1 to 5
4. Date and time
Press the y/z buttons to select the day, month and time and use the 0 to 9
buttons to change the values, ”,
5. Tone/Pulse dialling mode
y/z, 1= tone dialling, 2= pulse dialling, ”,
6. Flash time
y/z, 1= 90 ms, 2= 250 ms, ”,
7. Volume and ringing melody for the base station
y / z , OFF to 5 , 1 to 5

Restoring the default settings

1. Remove the batteries from the handset.
2. Insert the batteries in the handset again and press and hold the * button immediately
until 8888888 appears in the display.
3. Press the ” button until an acoustic confirmation signal is issued. The telephone
switches to Standby mode after a short time.
5 Telephoning
All descriptions in this operating manual assume that the handset is in Standby mode. The hand-
set is in Standby mode after pressing the ‚ button.
Take call
End call
Make external call
Redialling
Dialling from calls log
Dial number from phone number memory
Quick dialling
Internal calls
There must be phone numbers stored in the phone book; . Page 63
56
, ” ,
, ” ,
, ” .
ƒ
‚
ƒ, ëor ë, ƒ
£, y/z, ƒor ƒ, £
z,y/z, ƒ
”,y/z, ƒ
3 sec 1, 2 or 3
3 sec I, ë