Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Service and Maintenance

Do not allow the machine to become contaminated.
Remove dust from air vents with air compressor, vacuum or a soft brush.
Only use a damp cloth to clean the casing.
Before storing run distilled water through the system to help avoid condensing the
pump or heater.
It is recommended to run the machine on a monthly basis in order to achieve best
performance and output condition.
Excessive dust, liquid and dirt built up will degrade performance and cause
overheating.
Before storing away after operation, pump pure water through the system for at least 1
to 2 minutes. This will help clean out the remaining snow fluid and prevent pump from
malfunction on next usage.
Breaker Reset
Disconnect AC power before resetting the breaker. Only replace fuse with same
type and rating.
Step 1: Disconnect power cord from supply.
Step 2: Flip breaker to ON position.
Step 3: Turn on machine for testing.
Breaker
120V = 10A 250V
240V = 5A 250V
14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

S-500l

Table des Matières