Antari S-500 Mode D'emploi page 11

transmitters. Follow below diagram to pair or delete transmitter.
IMPORTANT NOTE: Wireless register menu will only be shown when Wireless is turn ON
Transmitter battery replacement
If the effective distance seems to decrease, it is possible the battery level is low and
requires replacement. In order to replace the battery, undo the three screws on the back of
transmitter to release the cover. Replace with same type and specification of battery which
is 27A 12V.
SC-3 Wire remote Operation (Optional)
Wired remote control module SC-3 enables to control the machine from a remote location.
With three push buttons and two rotary knobs to activate/deactivate, priming and output
level adjustment.
Button/Knob
[TOP LEFT KNOB]
[TOP RIGHT KNOB]
[LEFT BUTTON]
[CENTER BUTTON]
[RIGHT BUTTON]
Function
Adjust pump output level
Adjust blower output level
Max output on pump and blower
Turn On/Off SC-3 remote
Max output on blower
11