Service And Maintenance - Antari FT-20 Manuel D'utilisation

Service and Maintenance

Do not allow the machine to become contaminated.
․
Remove dust from air vents with air compressor, vacuum or a soft brush.
․
Only use a damp cloth to clean the casing.
․
Before storing run distilled water through the system to help avoid condensing the pump
․
or heater.
It is recommended to run the machine on a monthly basis in order to achieve best
․
performance and output condition.
Excessive dust, liquid and dirt built up will degrade performance and cause overheating.
․
LED Status Indicator
Status
Standby/Ready
Producing fog
Producing fog via DMX
Low battery
Machine error
LED Indicator
Constant on
Slow flash
Alternate quick and slow flash
Quick flash
Fast flash
12