Service And Maintenance - Antari M-7 RGBA Mode D'emploi

machine is tested and calibrated with this liquid to get the best output performance.
Warranty will be void if any other type of liquid is used, improper use of liquid may lead to
machine failure and malfunction.

Service and Maintenance

Do not allow the machine to become contaminated.
․
Remove dust from air vents with air compressor, vacuum or a soft brush.
․
Only use a damp cloth to clean the casing.
․
Before storing run distilled water through the system to help avoid condensing the pump
․
or heater.
It is recommended to run the machine on a monthly basis in order to achieve best
․
performance and output condition.
Excessive dust, liquid and dirt built up will degrade performance and cause overheating.
․
Breaker Reset
Disconnect AC power before reset breaker. Only replace fuse with same type
and rating.
Step 1: Disconnect AC power
Step 2: Flip breaker to ON position
Step 3: Turn on machine to test
Breaker
120V = 15A 250V
230V = 9A 250V
11