Mains Connection - Skandika ELSKLING E 520 Instructions De Montage Et Mode D'emploi

Step 7
Loosen the 4 screws (69) from the back of computer (9). Connect the upper sensor cable (48) and the pulse
cables (50) to the computer (9). Fix the computer (9) to the bracket of front post (2) using the 4 screws (69).
CHECK IF ALL BOLTS AND NUTS ARE
TIGHTENED BEFORE USING THE DE-
VICE!

Mains connection

The computer gets its power supply by the included adaptor. The adaptor will be connected to a normal
mains plug (European standard, please check the specifications resp. please use a fitting mains adaptor for
your power system). If you have to buy a new adaptor it is important to pay attention that it is GS approved
and corresponds to the product safety law.
Don't use another electricity supply because this could cause damages or impairments of functions.
36