Mains Connection; Seat Adjustment - Skandika SF-2390 Instructions De Montage Et Mode D'emploi

Step 10
Connect the device to the mains. The adaptor connection is located above the front stabilizer:

Mains connection

The computer gets its power supply by the included adaptor. The adaptor will be connected to a normal
mains plug (European standard, please check the specifications resp. please use a fitting mains adaptor for
your power system). If you have to buy a new adaptor it is important to pay attention that it is GS approved
and corresponds to the product safety law and the below mentioned specifications.
Don't use another electricity supply because this could cause damages or impairments of functions.

Seat adjustment

Pull the adjustment lever (16)
upwards to adjust the seat (13)
in forward / backward direction.
Push the lever down to lock the
seat.
Level stand
Use the adjuster (24) to adjust the unit for a level stand.
34
Adaptor connection
CHECK IF ALL BOLTS AND NUTS ARE
TIGHTENED BEFORE USING THE DE-
VICE!