Skandika ELSKLING E 520 Instructions De Montage Et Mode D'emploi page 30

Before starting to assemble we recommend to look for a place with sufficient space. Use a floor protection.
Remove all parts from the carton and spread them on the floor. Check according to the checklist, if all parts
are complete. Perhaps some parts are already pre-assembled for your convenience.
We recommend to set-up the device with 2 persons.
Step 1
Fix the front stabilizer (6) on front part of main frame (1) with 2 screws (59) and 2 flat washers (57) as shown.
Then fix the rear stabilizer (7) on rear part of main frame (1) with 2 screws (59) and 2 flat washers (57).
30