Skandika ELSKLING E 520 Instructions De Montage Et Mode D'emploi page 34

Step 5
Remove the pre-assembled 6 screws (71) and flat washers (57) from the main frame (1).
Slide the cover (43) from below through the front post (2) and connect the upper sensor cable (48) to the
lower sensor cable (49).
Insert the front post (2) into the main frame (1) and fix it with the screws (71) and flat washers (57). Mount
the bottle holder (72) on front post (2) with 2 screws (52) .
34