Fronius Galvo 1.5-1 208 Instructions De Service page 42

Temperature warning
TOTAL Reset
menu item to zero.
To reset the values to zero, press the "Enter" key.
40
to activate / deactivate the overtemperature warning for an event;
the overtemperature warning is sent and shown on the display.
ON / OFF
resets the max. and min. voltage values and the max. power of feeding in in the LOG
Once you have reset the values, this cannot be undone.
"CONFIRM" is displayed.
Press the "Enter" key again.
The values are reset and the menu is displayed.