How To Replace: Lamp; Troubleshooting; Service Data - Progress PHN13002X Notice D'utilisation

18 Progress

How to replace: Lamp

WARNING! Risk of electric
shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until
the oven is cold.
Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

TROUBLESHOOTING

WARNING! Refer to Safety
chapters.
What to do if...
In any cases not included in this table
please contact with an Authorised Service
Centre.
Problem
The oven does not
heat up.

Service data

If you cannot find a solution to the problem yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on
the front frame of the oven cavity. Do not remove the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Before you replace the lamp:
Step 2
Disconnect the oven from
the mains.
Check if...
The fuse is blown.
Put a cloth on the bottom of
Problem
The door gasket is
damaged.
The lamp does not
work.
.........................................
Step 3
the cavity.
Check if...
Do not use the
oven. Contact an
Authorised Service
Centre.
The lamp is burnt
out.