Troubleshooting - Cleanmaxx PC-P008 Mode D'emploi

Masquer les pouces Voir aussi pour PC-P008:

Mode d'emploi (44 pages)

Table des Matières

Les langues disponibles

■

The device may not be connected with the mains adapter when cleaning the dust

bin.

■

Never use soap or other cleaners to clean the dust and HEPA ﬁ lter. Otherwise this

would damage the ﬁ lters.

■

The ﬁ lters are not suitable for the washing machine, dishwasher or dryer! Only air

dry the ﬁ lters and do not in any case use a hair dryer.

■

Only put the device back together once all parts are completely dry!

■

Do not use any corrosive or abrasive cleaners to clean the housing. They could

damage the surface. If needed, clean the housing with a damp, soft cloth.

Emptying the dust bin and cleaning the ﬁ lters

1. Take the dust bin off of the device by turning it approx. one quarter revolution coun-

terclockwise and pulling it out.

2. Push the release button on the dust bin and empty the dust bin over a waste bin.

4. If necessary, clean the dust bin and the ﬁ lters with clean, lukewarm water.

5. Allow all parts to dry completely before assembling them.

ATTENTION: Do not in any case insert the ﬁ lters if they are still moist. Reverse

the steps to assemble them. Make sure that the catches on the dust bin are inserted

into the corresponding recesses on the main unit. Otherwise, the dust bin will not

correctly lock into the device.

6. Store the device and accessories in a dry area out of the sun that is not accessible

to children and animals.

If you do not want to use the device for a prolonged period, remove the rechar-

geable battery to stay on the safe side (see section "Removing the rechargeable

battery").