Parameters In The "Settings / Weighing" Menu - Sartorius Entris II BCA324I-1 Série Mode D'emploi

Operating Concept
4 . 1 1 .4

Parameters in the "Settings / Weighing" Menu

Parameters Settings
Safety Level High*
Standard
Low
Ambient Very stable
conditions
Stable*
Unstable
Very unstable
Application Weighing*
Dosing
Stability signal High accuracy
Medium
accuracy*
Fast
* Factory setting
22 Entris II Advanced Line Operating Instructions
®
Explanation
If the balance is not correctly leveled or a calibration/adjustment is not needed
or the minimum initial weight requirements according to USP are not met:
− A warning message is displayed .
− No data is transmitted .
− The printout is blocked .
− Starting and saving in applications is blocked .
If the balance is not correctly leveled or a calibration/adjustment is not needed
or the minimum initial weight requirements according to USP are not met:
− A warning message is displayed .
− If the balance is not leveled: The [Start leveling] button is active .
− If the balance needs to be calibrated and adjusted: The [isoCAL] button is
active .
Sets the ambient conditions to "very stable" . Activates a fast change in the
weight values in the event of a load change with a high output rate .
Recommended for the following work environment:
− Very stable table near the wall
− Closed and calm room
Sets the ambient conditions to "stable" . Recommended for the following work
environment:
− Stable table
− Slight movement in the room
− Slight draft
Sets the ambient conditions to "unstable": Activates the delayed change in
weight values with a reduced output rate . Recommended for the following work
environment:
− Simple office desk
− Room with moving machinery or personnel
− Slight air movement
Sets the ambient conditions to "very unstable": Activates a significantly delayed
change in the weight values and long wait for stability with a further reduction in
the output rate .
Recommended for the following work environment:
− Noticeable and slow floor vibrations
− Noticeable building vibrations
− Weighed goods moved
− Very strong air movements
Activates a filter that enables a fast change in the display for very fast load
changes . Display changes with minimal load changes (in the digit range) occur
more slowly .
Activates a filter that enables a very fast change in the display with minimal load
changes, e .g ., when dosing or filling vessels .