Displays In The Operating Display; Navigating The Menus - Sartorius Entris II BCA324I-1 Série Mode D'emploi

Operating Concept
4 .8

Displays in the Operating Display

Symbol Name
[Sign] display
[Zero] display
[Percent] display
[Computed value]
display
[Net] display
[Gross] display
[PC connection]
display
[Second display]
display
[Printer] display
[USB] display
[Invalid weight
value] display
4 .9

Navigating the Menus

Procedure
16 Entris II Advanced Line Operating Instructions
®
Description
Indicates whether the value being displayed is positive or negative .
For some conformity-assessed devices: Indicates that the device has been
zeroed .
Indicates that a percentage value is being displayed .
If the "Conversion" or "Peak hold" application is active: Indicates that a
calculated value or frozen value is being displayed .
Indicates that a net value is being displayed .
Indicates that a gross value is being displayed .
Indicates that a PC has been detected at the USB-PC port .
Indicates that an FTDI cable or a second display has been detected at the USB
port .
Indicates that a printer has been detected at the USB port .
Indicates that a USB stick has been detected at the USB port .
Indicates that the display does not contain a weight value, but is instead the
calculated result of an application, e .g ., for the "Totalizing" application .
In order to navigate
t
within a display, e .g .,
in the settings or
application
management: Swipe
the operating
display in the
desired direction,
e .g ., upwards or
downwards .
To modify the parameters in an application: Select
t
an application in Application Management .
1
Press the application
t
toolbar (1) .
The display containing
y
the application-
specific parameters
opens .