Melitta Caffeo Bistro Guide D'utilisation page 74

Warning!
The descaling agent can cause skin irritations
Comply with the safety instructions and the dosing information specified on the
descaling agent packaging.
7 Reinsert the water tank.
8 Press the button for steam dispensing
→ Phase 1 is completed.
Phase 2
During Phase 2, two bean symbols
→ The integrated descaling programme is started. Water flows inside the
appliance into the drip tray. This stage lasts approximately 10 minutes.
Then the valve symbol
9 Pull the whisk of the Perfect Cappuccino downward and off of the steam
pipe (Fig. F).
10 Turn the Perfect Cappuccino so that the steam pipe is inside the coffee
grounds container.
Warning!
Risk of burns through hot steam pipe or hot whisk
Never touch the steam pipe or the whisk of the Perfect Cappuccino during hot
water dispensing.
11 Turn the valve switch (Fig. A, no. 6) clockwise to open the valve.
→ The valve symbol
pipe into the vessel. This stage lasts approximately 10 minutes.
→ The drip tray symbol
when the descaling solution has flowed through the entire appliance.
12 Empty the drip tray and coffee grounds container.
13 Reinsert the drip tray without the coffee grounds container, and place
the coffee grounds container under the Perfect Cappuccino.
72
Heft_Caffeo_Bistro_EU_2.2.indd 72
.
are shown on the display.
illuminates.
flashes. The descaling solution flows out of the steam
and the water tank symbol will be illuminated
09.04.2014 14:33:55