Changing the menu settings
Menu items are displayed as the following
icons:
MANUAL SET
CAMERA SET
VCR SET
LCD/VF SET
MEM SET 1
MEM SET 2
CM SET
TAPE SET
SETUP MENU
OTHERS
English
Selecting the mode setting of each item
Menu items differ depending on the position of the POWER switch.
The screen shows only the items you can operate at the moment.
Mode
Icon/item
MANUAL SET
PROGRAM AE
P EFFECT
z OFF
RED EYE R
FLASH LVL
z NORMAL
WHT BAL
SHARPNESS
AUTO SHTR
z ON
* The electronic shutter is the function used to adjust the shutter speed automatically.
Note on RED EYE R and FLASH LVL
You cannot adjust RED EYE R and FLASH LVL if the external flash (optional) is not compatible.
Meaning
——
To suit your specific shooting requirement (p. 75)
——
To add special effects like those in movies or on the TV
to images (p. 71, 89)
Red-eye reduction does not function.
ON
Preliminary flash before recording prevents red-eye.
HIGH
To make the flash level higher than normal
To use the normal setting
LOW
To make the flash level lower than normal
——
To adjust the white balance (p. 64)
——
To adjust the sharpness of the image outline with R/r.
The
indicator appears on the screen.
To soften
To automatically activate the electronic shutter* when
shooting in bright conditions
OFF
To not automatically activate the electronic shutter*
even when shooting in bright conditions
Changement des réglages des
paramètres des menus
Les paramètres du menu sont regroupés sous
les icônes suivantes :
MANUAL SET
CAMERA SET
VCR SET
LCD/VF SET
MEM SET 1
MEM SET 2
CM SET
TAPE SET
SETUP MENU
OTHERS
z is the default setting.
To sharpen
(continued on the following page)
POWER
switch
225