EUROM Heat-Duct-Pro 3 Manuel D'instructions page 46

remove the cause of the cut-off then this will probably be repeated. Regular
overheating can give rise to irreparable damage. When the overheating safeguard
switches the heater off, set the mode selector dial to 'OFF' (off), unplug and allow
the heater to cool down. Remove and/or amend the cause of overheating and reuse
the heater as normal. If you cannot find a cause and overheating recurs, stop using
the heater, and take it in for inspection/repair.
Cleaning and maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common
cause of overheating so these should be removed regularly. Switch off the heater,
remove the plug from the socket and allow the heater to cool down before cleaning
or carrying out maintenance work.
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do

not use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions and prevent water from getting into the heater itself!
Use a vacuum cleaner or compressor to carefully remove any dust and dirt from

the grills and ensure that the air intake and outlet openings are clean. Be
careful not to touch or damage any internal parts during cleaning!
The heater contains no other parts which need maintenance.

At the end of the season, store the cleaned heater in the original packaging if

possible. Store upright in a cool, dry and dust-free place.
Do not dispose of the heater with household waste when it becomes worn or

damaged beyond repair. Take it to your local authority's collection point for
electrical appliances where any reusable materials will be collected and
redistributed.
Removal
CE-statement
See page 102.
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should
be made suitable for reuse in order to prevent any adverse effects
to health and the environment caused by unregulated waste
collection. Therefore, please make sure that you bring old
equipment to a designated collection point. Alternatively, contact
the original supplier, who can make sure that as many of the
components as possible can be recycled.
46