Main Maintenance Operations; Removing The Fairing - Ducati 999 Manuel D'utilisation

MAIN MAINTENANCE OPERATIONS

Removing the fairing

Some servicing operations need the motorcycle fairing to
be removed.
E
Warning
Firmly and properly secure all removed parts when
refitting them, otherwise some of them might suddenly
come off when riding and you may lose control of your
motorcycle.
Important
At reassembly always fit nylon washers when
tightening fastening screws, not to damage painted parts
and Plexiglas headlamp fairing.
Side body panels - biposto
Remove the body panels as follows. Using the Allen key
accommodated under the seat unscrew what follows:
the two quick fasteners (1) securing the body panels to
the brackets.
the two quick fasteners (2) securing the body panels to
the headlamp fairing.
the four frame quick fasteners (3).
the screw (4) joining the right and left body panels at the
bottom end.
56
Side body panels - monoposto
Remove the body panels as follows:
Remove the four quick fasteners (3) with their ring
securing the body panels to the frame.
On the right-hand side, gain access to the tool kit, take
the Allen key for the fairing and remove the following:
the two quick fasteners (1) securing the body panels to
the brackets.
the two quick fasteners (2) securing the body panels to
the headlamp fairing.
the screw (4) joining the right and left body panels at the
bottom end.
2
3
fig. 48
4
1