Warning lights brilliancy
Warning lights brilliancy is automatically adjusted by the
instrument panel depending on the quantity of outer
light detected.
Backlighting
Instrument panel backlighting is on only if the parking
lights or the low/high beams are turned on.
In this case the instrument panel, thanks to some
sensors measuring ambient temperature and light
intensity, can automatically turn the backlighting on or
off.
Lights self-disabling
This function allows a lower voltage consumption from
the battery, by automatically switching off the headlight.
The device is triggered in two cases:
- in the first case, if you turn the key from OFF to ON
and do not start the engine within 60 Sec. the
headlight is turned off and will be turned on again only
at next key OFF/ key ON.
- in the second case, after the daily use of the vehicle
with the lights on, if the engine is killed via the RUN-
STOP button on the RH switch.
In this case, after 60 Sec. from engine killing, the
headlight will be turned off and will be turned on again
only upon next engine starting.
E
19