Finish Cooking; Timer Control - ETNA KI2160ZT Mode D'emploi

OPERATION

Finish cooking

• Set the cooking power level to zero (0) to turn Off the cooking zone.
• Turn the induction hob Off by touching the On/Off key.
After switching off, 'H' or a '-' appears on the display.
▷

Timer control

• A cooking-timer can be set for each active cooking zone.
• The hob also has an alarm. Both the cooking-timer as well as the alarm can be set for a
maximum of 99 minutes.
• The alarm works in the same way as the cooking-timer, but is not linked to a cooking zone.
If the alarm has been set, it will continue counting down after the hob has been
switched off.
• The alarm can only be switched off when the hob is switched on.
Using the timer
1. Select the cooking zone to which you want to link a cooking timer.
The display for the cooking zone will start flashing.
▷
2. Touch the timer key to start the timer.
The timer display shows '10'.
▷
▷ The timer indication light next to the cooking zone power level blink.
3. Set a cooking time with the plus (+) and minus (-) keys.
The cooking zone will switch off after the set time has passed and the timer alarm
▷
beeps.
▷
Using the kitchen alarm
1. Touch the timer key to start the timer.
The timer display shows '10'.
▷
2. Set the alarm time with the plus (+) and minus (-) keys.
▷ When the set time has elapsed, the timer alarm sounds.
▷ Touch the timer key to stop the alarm.
or
EN 13