ETNA KI2160ZT Mode D'emploi page 32

OPERATION
Changing preset cooking time
The cooking time can be changed anytime during the operation.
1. Touch a cooking zone selection key, to select the active cooking zone for which you want to
change the timer.
▷ A flashing point next to the cooking zone power lever indicates the active cooking zone.
2. Touch within 5 seconds the plus (+) and minus (-) keys to change the time.
If time is not modified in 5 seconds since touching the keys, the timer is keeping the
▷
countdown before the adjusting operation.
Checking remaining cooking time
• The timer displays shows the remaining time from the cooking zone for which the point
adjacent to the power level is flashing. When more than one cooking timers are set, the
shortest time set will be visible in the display.
1. Touch a cooking zone selection key, to select the active cooking zone for which you want to
check the remaining time.
▷ The flashing point next to the cooking zone power lever indicates the active cooking
zone.
▷ The timer will display the remaining time of the selected cooking zone.
Turning the timer Off
If you want to switch Off the timer prior the end of preset time:
1. Touch the timer keys as many times as necessary, to select the zone of which you want to
disable the timer.
2. Touch the minus (-) key and plus (+) key simultaneously to switch Off the timer.
The timer indication light next to the cooking zone power lever goes out.
▷
EN 14