Operation; Start Cooking; Boost Functiion; Finish Cooking - ETNA KIF160ZT Mode D'emploi

OPERATION

Start cooking

Use of the touch keys
Place the tip of your finger flat on a key to achieve the best results. You do not have to apply
any pressure. The touch keys only react to the light pressure of a fingertip. Do not operate the
controls with any other objects. Each key activation is followed by a sound signal.
1. Touch and hold the On/Off key until you hear an audio signal.
▷ The hob is switched on.
'-' or '--' appears in all displays.
▷
2. Touch within 60 seconds a cooking zone selection key.
▷ A short beep sounds and the corresponding display flashes.
3. Touch the minus (-) or plus (+) key to select a cooking power level.
The cooking zone starts at the set power level, visible in the display.
▷
Touch the cooking zone selection key and use the plus (+) and minus (-) keys to change
▷
a setting for a cooking zone.

Boost functiion

You can use the boost function to cook for max. five minutes at the highest power level. The
boost function can only be activated if it is applicable with the cooking zone selected.
1. In level '9', touch the plus (+) key again to start the boost power level.
▷ When boost is selected the boost indicator b and the previous power alternately flash
in the display. After five minutes on boost level the cooking zone switches back to the
previous power setting.
▷ Touch the minus (-) key to switch off the boost setting.

Finish cooking

1. Set the cooking power level to zero (0) to switch off the cooking zone.
2. Switch off the induction hob by touching the On/Off key.
After switching off, 'H' appears on the display of a cooking zone that is still hot.
▷
Touch the plus (+) and minus (-) key simultaneously to set the selected cooking zone to
zero (0) level directly.
EN 11