Operation; Start Cooking - ETNA KI2160ZT Mode D'emploi

OPERATION

Start cooking

Use of the touch keys
Place the tip of your finger flat on a key to achieve the best results. You do not have to apply
any pressure. The touch keys only react to the light pressure of a fingertip. Do not operate the
controls with any other objects.
Each key activation is followed by a sound signal.
1. Touch and hold the On/Off key until you hear an audio signal.
The hob is switched on.
▷
'-' or '--' appears in all displays.
▷
2. Touch within 60 seconds a cooking zone selection key.
▷ A short beep sounds and the corresponding display flashes.
3. Touch the minus (-) or plus (+) key to select a cooking power level. Touch if desired the
boost key 'B' to start the boost power level.
The cooking zone starts at the set power level, visible in the display.
▷
When boost is selected the boost indicator P and the previous power alternately flash
▷
in the display. After 5 minutes on boost level the cooking zone switches back to the
previous power setting.
Touch boost again to switch off the boost setting.
▷
▷ Touch the selection button and use the plus (+) and minus (-) buttons to change a setting
for a cooking zone.
EN 12