Finish Cooking; Timer Control - ETNA KIS560ZT Mode D'emploi

OPERATION

Finish cooking

• Set the cooking power level to zero (0) to turn Off the cooking zone.
• Turn the induction hob Off by touching the On/Off key.
Symbol H will appear in the display of the cooking zone which is to hot to touch. It will
disappear when the surface has cooled down to a safe temperature. It can also be used
as an energy saving function if you want to heat further pans, use the cooking zone that
is still hot.

Timer control

Using the cooking timer
1. Switch on the hob.
2. Touch a slider of the cooking zone you want to set the timer for.
3. Set the time by touching the minus (-) or plus (+) timer key.
▷ Touch the minus (-) or plus (+) key once will decrease or increase by 1 minute.
Touch and hold the minus (-) or plus (+) key will decrease or increase by 10 minutes.
▷
▷ As long as the time is flashing in the display it can be adjusted.
▷ When the time is set, it will begin to countdown immediately.
The display will show the remaining time.
▷
The red dot next to the power level display will illuminate, indicating the cooking zone is
▷
linked to the timer.
When the cooking timer expires, the corresponding cooking zone will be switched off
▷
automatically.
▷ An alarm will sound for 30 seconds and the timer display shows '--'.
or
EN 15