Air Cooling Kit Installation (Only For Air Cooled Pumps) - Agilent Technologies TwisTorr 305-IC Mode D'emploi

8 Technical Information

Air Cooling Kit Installation (only for air cooled pumps)

Air Cooling Kit Installation (only for air cooled pumps)

An air cooling kit (X3500-68010) is available to improve the TwisTorr
305-IC cooling during operational conditions.
Fan specifications:
▪
▪
▪
▪
▪
Figure 29
The fan bracket is shaped so that it can be mounted close to the pump.
To fix the fan to the TwisTorr 305-IC case execute the following procedure (see the
following figure):
1
2
3
4
250/302
air flow: 147 m /h
3
input voltage: 24 Vdc
dimensions: 119 x 119 x 32 mm (4.7 x 4.7 x 1.3 in.)
power: 2.6 W
Mount the 305-IC Fan/Vent Adapter kit P/N X3514-68001 (the adapter is provided with
two extension cables, suitable for mounting of the cooling fan and the vent kit).
Fix the fan to the suitable bracket by means of the furnished screws
Fix the bracket to the pump body.
Connect the fan supply to the the adapter (P/N X3514-68001) connector, by the
extension cable.
TwisTorr 305-IC User Manual / 87-901-058-01