Agilent Technologies TwisTorr 305-IC Mode D'emploi page 269

Technical Information 8
Signal Description
Figure 49
Programmable analog signal: this output signal is a voltage (from 0 to 10 Vdc) proportional
to a reference size (Frequency or Power or Temperature) set by the user. The default factory
setting is the rotational frequency (see the following example diagram). The user can set the
reference size by acting via serial command.
When the reference size is Power, the relation is:
ANALOG OUTPUT Vout =10V --> Output power = 200W
When the reference size is Temperature, the relation is ANALOG OUTPUT
Vout =10V --> Pump Body Temperature = 125°C
TwisTorr 305-IC User Manual / 87-901-058-01 269/302