LAVAZZA CLASSY PRO DWC Mode D'emploi page 27

Remove the tank and pour all the contents of
the LAVAZZA descaling agent bottle, then
add water up to the line level shown on the
tank.
Fit the tank back into place onto the machine.
Press the MULTIFUNCTION button
start the descaling cyc le.
During the descaling cycle, the display will show
the following animation.
In the event of power supply failure during
the descaling cycle, at next power-on, the
machine will return automatically to the
descaling cycle start condition.
MACHINE MENU
During the descaling cycle the machine performs
automatically pauses to allow emptying of the
container
At the end of dispensing the decalcification
solution, the cycle is temporarily suspended.
The display will show the following animation.
Remove the tank and rise it thoroughly to
eliminate any descaling agent residue.
to
Fit the tank back into place onto the machine.
Remove the drop drawer and the exhausted
pod drawer, then empty the container used for
the descaling solution.
Press the MULTIFUNCTION button
confirm.
CLEAN/REFILL WATER TANK
EN
to
27