Cleaning; Cleaning The Pressure Washer; Cleaning The Nozzle And Spray Lance - Stihl RE 130 PLUS Notice D'emploi

English
When storing the pressure washer for three months or
longer:
► Clean the pressure washer, @ 15.1.
► Store the pressure washer indoors in a dry and secure
location, out of the reach of children and other
unauthorized persons.
► If the pressure washer cannot be stored in a room where
it is protected from freezing temperatures, protect the
pressure washer as outlined above, @ 12.2.
NOTICE
Freezing temperatures can damage components of the
pressure washer. STIHL recommends storing the pressure
washer indoors in a dry room where it is protected from
freezing temperatures. Relieve all system pressure and
make sure all water is eliminated from the pump system and
hoses before storing.

15 Cleaning

15.1 Cleaning the Pressure Washer

WARNING
Before carrying out any of the cleaning work specified in this
chapter @ 6, take certain measures to reduce the risk of
personal injury from unintended activation: switch off the
pressure washer and disconnect the unit from the power
supply. Relieve all system pressure by pulling the trigger
switch and lock the spray gun trigger.
To clean the pressure washer:
► Clean the pressure washer's polymer components,
couplings and connectors with a slightly dampened cloth.
Do not use abrasives or solvents that may damage the
pressure washer's polymer components.
► Do not use a pressure washer to clean the unit or
otherwise spray it with water or other liquids.
28

15.2 Cleaning the Nozzle and Spray Lance

A clogged high pressure nozzle can cause excessive
pressure to build in the pump. Clean the high-pressure
nozzle if it becomes clogged.
To clean the nozzle and spray lance:
► Rinse the nozzle and spray lance under running water and
dry them with a cloth.
► If the nozzle is blocked, use the cleaning needle to clear
the opening.
15 Cleaning
0458-836-8221-A