Stihl RE 130 PLUS Notice D'emploi page 35

17 Troubleshooting Guide
Before troubleshooting, switch off the pressure washer and disconnect the unit from the power supply. Relieve all system
Condition
Detergent is not being drawn
in.
The connections of the
pressure washer, high-
pressure hose, spray gun or
spray lance are stiff.
0458-836-8221-A
pressure by pulling the trigger switch. Lock the spray gun trigger.
Possible Cause
The nozzle is worn.
The detergent container is empty.
The nozzle of the detergent spray set is
blocked.
The gaskets of the connections have not
been greased.
Remedy
► Insert a new nozzle.
► Fill the container with detergent.
► Clean nozzle of the detergent spray set.
► Grease the gaskets. @ 16.3
English
33