Panel Underneath The Keyboard; Expression Pedal - Viscount Chorum 10 Dlx Mode D'emploi

User Manual

2.2 PANEL UNDERNEATH THE KEYBOARD

1. [PHONES] connector: Jack connector for connecting stereo headphones. The internal speakers are
turned off when the headset is connected.
2. [OUT] connectors: line outputs for connection to external audio devices (powered speakers, mixers,
amplifiers), in which the instrument's general signal is present.
In case of stereo system, connect the [L/Mono] output to the left channel and the [RIGHT] output to
the right channel. If a monophonic system is used, only connect the[L/Mono] connector.
3. [USB] connectors:
-
[ ]: insert the USB stick you want to use into this connector.
-
[TO HOST]: connector for transmitting and receiving MIDI data with a computer.
4. [MIDI] connectors: connectors for connecting MIDI devices.
- [IN]: input connector for receiving data from an external MIDI unit to the Chorum 10.
Connect to the MIDI output of the transmitting device (e. g. a sequencer).
-
[OUT]: this connector transmits the MIDI data generated by Chorum 10. Connect to the MIDI
input of the receiving device (e. g. an expander).

2.3 EXPRESSION PEDAL

1 2 3
2
1
4
1. Expression pedal: allows continuous control
of the instrument's volume.
2. Sustain effect lever: lever to control the
sustain effect for orchestral voices.
EN - 6
Chorum 10 Dlx – Chorum S10