Faults; Causes And Remedies - Soehnle Professional 9055 Mode D'emploi

4. FAULTS – – – – CAUSES AND REMEDIES

4. FAULTS

4. FAULTS 4. FAULTS

CAUSES AND REMEDIES

CAUSES AND REMEDIES CAUSES AND REMEDIES
If you are unable to correct the fault or if other error messages appear, please contact your service
partner.
www.soehnle-professional.com
DISPLAY DISPLAY
DISPLAY DISPLAY
Underload: only dashes appear at the
bottom of the display field.
Overload: only dashes appear at the top
of the display field. Maximum weighing
range is exceeded.
Scales not stabilised when resetting.
REMEDY REMEDY
REMEDY REMEDY
Switch the scales off and then on
again. The zero point is reset
automatically.
Remove part of the weighed
goods from the scales, or switch
the scales off and then on again.
The zero point is reset
automatically.
Test the scales with a force shunt.
18