Migatronic DELTA 140E Manuel D'instructions page 88

Garantibetingelser
Migatronic udfører løbende kvalitetskontrol
gennem hele produktionsforløbet samt afprøvning
af de komplette enheder gennem omfattende test.
Migatronic yder garanti i henhold til nedenstående
bestemmelser ved at udbedre fejl og mangler ved
enheder, der påviseligt og indenfor garantiperioden
måtte skyldes materiale- eller produktionsfejl.
Garantiperioden er 24 måneder for nye
svejsemaskiner, 12 måneder for nyt tilbehør og 6
måneder for reservedele. Garantiperioden regnes
fra dato for fakturering til slutbruger fra Migatronic
eller Migatronics forhandler. I tilfælde af salg
gennem Migatronics forhandler, udløber
garantiperioden under alle omstændigheder senest
36 måneder for nye svejsemaskiner og 30
måneder for reservedele, regnet fra dato for
fakturering fra Migatronic til forhandler. Denne frist
forlænger på ingen måde ovennævnte
garantiperiode. Den originale faktura udgør
dokumentation for garantiperioden.
Svejseslanger anses som sliddele; og alene fejl og
mangler, der konstateres indenfor 6 uger efter
levering og som skyldes materiale- eller
produktionsfejl, vil blive betragtet som omfattet af
garantien.
Garantireparationer hverken forlænger eller fornyer
garantiperioden.
Enhver form for transport af varer eller personer i
forbindelse med en garantireklamation er ikke
omfattet af Migatronics garantiforpligtelse og vil
derfor ske for købers regning og risiko.
Der henvises endvidere til
www.migatronic.com/warranty
Warranty conditions
Migatronic continuously carries out quality control
throughout the manufacturing process as well as
check of the complete units through
comprehensive testing.
Migatronic provides warranty in accordance with
the following provisions, by correcting errors and
defects on units, that demonstrably and within the
warranty period may have been caused by faulty
material or workmanship.
The warranty period is 24 months for new welding
machines, 12 months for new accessories and 6
months for spare parts. The warranty period is
calculated from the date of invoice to the end user
from Migatronic or Migatronic's dealer/distributor. In
the case of sales through Migatronic's
dealer/distributor, the warranty period expires in
any event within 36 months for new welding
machines and 30 months for spare parts from the
date of invoice from Migatronic to the
dealer/distributor. This extension in no way extends
the warranty period. The original invoice is proof of
the warranty period.
Welding torches are considered as wearing parts,
and only errors and defects found within 6 weeks
upon delivery and due to faulty material or
workmanship, will be considered under warranty.
Warranty repairs neither extend nor renew the
warranty period.
Any transport of goods or persons in connection
with a warranty claim is not covered under
Migatronic's warranty obligation and will therefore
be at the buyer's expense and risk.
Please also refer to
www.migatronic.com/warranty.
88